Fix Apple Logo Boot Loop On iOS 9.3.3 Jailbreak, Here’s How

In view of this, because it is about modern jailbreak has become as much about troubleshooting and solve the problem, as much as possible and enjoy the liberation of Apple devices actually bring freedom. When the device is stuck in the boot cycle, and continue to return to restart the Apple logo appears one of the most frustrating problems.

Fortunately, if you know what you are doing, you can actually avoid and solve potential problems. Process listed below will be used to run the jailbreak on iOS 9.3.3 version of the iPhone, iPad and iPod touch devices running. So without further ado, here is what you need to do

how to fix the boot loop issues on iOS 9.3.3 Jailbreak:

step 1: when you start the cycle of death occurs because you may have installed, or because the conflict is not compatible with a plurality of adjustment is installed on the device between incompatible good way, the first thing you need to do is to perform a hard reset on the device in question. Since this is a perfect escape and a half, that is a hard reset the device placed in a non-jailbroken state. To Jailbreak iPhone, iPad or iPod touch hard reboot, please follow our detailed instructions here: how hard start / restart your iPhone, iPad or iPod touch

step. 2: When you restart from the hard disk back to the lock screen to unlock the device, and then locate the Settings> General> of iCloud , and make sure that Find My iPhone Disable

Step 3: Now go to Settings> Touch ID and password and ensure device security password function is disabled. If not, click Turn Off Password , and then follow the instructions on the screen to confirm the change

Step Four: Once Find the iPhone and password are disabled on the device to start the Pangu Team applications from the main screen. This bit is very important, therefore, treated in accordance with the following bullet, because it is not a simple re-jailbreak. We’re gonna put no substrate mode of the device, which is basically the ability to extend the substrate minus state run Cydia jailbreak, so you can uninstall the offending boot cycle changes to address the problem of death. Here’s how to go about doing this:

• Pangu jailbreak application, click start button to begin the process

• follow the prompts on the screen, use power button to manually lock device.


• When the lock screen notifications to remind the jailbreak has been successful, immediately press and hold the side of the device volume button until the Apple logo appears from the dawn of the application display. This equipment will be placed no substrate mode

Step 5: Now in the absence of the substrate mode, start Apple beetle as usual. Uninstall your last install, cause the device to enter a good way to death startup cycle (Figure)

Step 6: Once you complete the uninstall problematic adjustment, you can put your device to jailbreak mode, and enjoy the escape. Here is how to do the following explanation: re Pangu jailbreak / PP restart after iOS 9.3.3, here’s how

This should help you solve any problem boot cycle. You may have the iOS 9.3.3 jailbreak

You might also want to look at:

You can follow our microblogging , add us to your circle Google+’s or like our Facebook page , in order to maintain their updates from Microsoft, Google, Apple and the Web’s latest products.

Related stories

positions like this on Facebook

Fix Apple Logo Boot Loop On iOS 9.3.3 Jailbreak, Here’s How